NOFLUSH BIOCLEAN (Concentrate)
NOFLUSH BIOCLEAN IS SPECIALLY FORMULATED TO ELIMINATE ODOURS AND MAINTAIN LOW WATER USE URINAL SYSTEMS.
How it works
NoFlush BioClean works together with the NoFlush BioSleeve to help eradicate odours and staining in and around the urinal. The millions of micro-organisms work at degrading the lime-scale and uric salt deposits often found on the urinal surface , the areas surrounding the urinal and in the waste outlets.
Available in 1 Litre, 2 Litre and 5 Litre bottles.
Where to Use it
NoFlush BioClean, 10:1 dilution, is to be used on and around both trough type urinals and single ceramic models.
NoFlush BioClean, 20:1 dilution, to be used to mop toilet floors & clean surface that come into contact with urine, particularly tracked urine on toilet floors.
How to use it
NoFlush BioClean is a concentrate and needs to be diluted before use. Dilution ratio differs depending on the situation. Suggested dilutions are:
| Situation | Ratio | Per litre of water |
| Urinals daily clean & spray | 10:1 | 100ml |
| Toilet Floors /Standard cleaning | 20:1 | 50ml |
| Heavily Soiled /used | 10:1 | 100ml |
| Remedial Clean | 5:1 | 200ml |
Standard Cleaning is performed daily to remove any material from the face and surrounds of the urinal. Simply spray the diluted NoFlush BioClean over the face of the
urinal and its immediate surrounds. Wipe the areas sprayed with a cloth to remove soil, re-spray and leave to dry.
Mop Toilet Floors and Clean Surfaces in the Boys’ toilets and washrooms that come into contact with urine, particularly tracked urine on toilet floors.
Heavily Soiled or high use urinals may need a slightly stronger concentration but the cleaning method is the same as above.
Remedial Cleaning is performed where the urinal and surrounds have built up deposits that need extra time and attention to remove. Mix a stronger solution and thoroughly saturate stubborn deposits. Leave this for a few minutes and scrub, re-spray and leave overnight, scrub and rinse again.
